1. Place the solution vessel to be stirred in the middle of the chassis and sink the stirrer into the vessel.
2. Adjust the speed control knob clockwise to increase the speed from slow to fast, and adjust it to the desired rotational speed. The agitator rotates to drive the solution to stir.
3. When constant temperature heating is required, insert the temperature probe PT1000 into the solution, insert the plug into the mixer base, and adjust the temperature knob to the desired temperature.
4. If heating is not necessary, just adjust the temperature adjustment knob to below room temperature.
5. After using, turn off the power switch, disassemble the reaction device, unplug the power plug of the magnetic stirrer, and wait for the base temperature value light to go out.
