How to operate to make the service life of single-layer glass reactor longer?

The single-layer glass reactor is different from the double-layer glass reactor. It cannot control the circulating temperature through the interlayer. The mixing function enables the materials to be fully stirred inside the reactor. It is a very common equipment in the laboratory and production. Today we will share how to prolong the life of single-layer glass reactor.

① Before operation, it is necessary to check whether the equipment accessories are lost, whether the glass parts are damaged, and whether the value of the instrument is normal.

② Do not tighten any interface of the instrument too tightly, and release the interface regularly to avoid locking.

③ When wiping each connection port, be sure to use a clean soft cloth, and apply vacuum grease to strengthen lubrication.

④ Clean the sealing ring regularly, wipe it with a soft cloth and apply a small amount of vacuum grease.

⑤ Do not over tighten the PTFE switch to avoid damaging the glass.

⑥ After shutdown, release the PTFE switch to avoid deformation of PTFE piston.

⑦ When in use, let the equipment speed gradually accelerate from slow to fast, and turn off the switch after the standby equipment is completely stopped.

⑧ After using the equipment, wipe the dust, grease and solvent residues on the surface with a soft cloth in time.

⑨ Attention shall be paid to avoid serious failure caused by water entering electrical components.

⑩ The power must be turned off during equipment maintenance.