The double-layer glass reactor can use the heater chiller, recirculating chiller, thermostatic water bath and other equipment to heat or cool the interlayer circularly.
1. The power on indicator is not on:
When the power switch is turned on and the indicator light is not on, the professional electrician shall first check whether the power supply connected to the equipment is detached, loose, and the circuit is not energized. After the problem is found and solved, the equipment shall be put into trial operation.
2. The indicator light is normal but cannot rotate:
The power on display of the equipment is normal, but it cannot rotate. It is likely that the rotating shaft is rusted. Please communicate with the supplier in time. In other cases, due to motor and electrical faults, professional electricians are required to check and repair.
3. Vacuum pumping cannot be completed:
Check whether the sealing ring is worn, replace the sealing ring and apply vacuum grease for regular maintenance. The vacuum gauge and vacuum pump should also be cleaned regularly.
4. The vacuum suddenly disappears:
When the vacuum suddenly disappears under normal use during use, stop working immediately and check whether there are cracks on the glass, and contact the manufacturer to replace the damaged parts.
5. External electrification during use:
When the equipment is in operation, it is found that there is obvious electric shock when touching the equipment, which may be caused by water entering due to the connection of the heating pipe. Professional electricians should be invited to check and contact the manufacturer to replace the accessories.
