The heating and cooling circulator must connect all power supply of the equipment first. Before installing the equipment, we should understand the requirements of the electric wire of the circulating chiller of the high and low temperature integrated machine. If the conditions permit, try to parallel the high and low temperature circulating pump with other equipment on the circuit, it is recommended to set the switch of the circulating pump of the high and low temperature integrated machine separately. Because this can ensure that if the circuit or equipment of other equipment fails, it will not affect the normal use of circulating pump of high and low temperature integrated machine.
After the installation of the line, plug in the power plug and open the switch and drain valve of the main power supply. The switch of the main power supply is self-evident, and basically no one will ignore the switch, but many people will ignore the switch of the drain valve. The result of the drain valve switch not opening is that the circulating pump of the high and low temperature integrated machine cannot circulate water during operation, and a large amount of water will gather in the circulating pump of the high and low temperature integrated machine, which will hinder its normal operation and even lead to leakage.
Ensure that the main power supply of the high and low temperature circulating pump and the switch of the drain valve are in the open state, and then adjust the data required by the test. At this time, please note that the input data should not exceed the benchmark defined by the tester itself. After data adjustment, prepare for observation and record if necessary. After the high and low temperature circulating pump stops naturally within the specified time, the power supply must be turned off immediately. To prevent high and low temperature circulating pump leakage in the case of no monitoring, causing accidents. The use of high and low temperature circulating pump is relatively simple. Generally, high and low temperature circulating pump also has relevant product instructions. Users can refer to the instructions to solve relevant problems.
The above is the use method of high and low temperature circulating pump that Linbel brings to you. If you have any questions, you can contact us at any time, and we will serve you wholeheartedly.
